Skip to the page

Tint laws · CT

Connecticut Tint Laws 2026: 35% on Every Side and Rear Window

Windshield: Material is allowed only along the top, with its bottom edge at least 29 inches above the driver seat.

Front sides
35%
Rear sides
35%
Rear window
35%

Connecticut tint limits

WindowConnecticut rule
WindshieldMaterial is allowed only along the top, with its bottom edge at least 29 inches above the driver seat.
Front side windows35% or more light through glass and film
Rear side windows35%
Rear window35%
ReflectanceFront side windows: 27% or less (plus or minus 3%). DMV rules cap rear side and rear windows at 24%.
Meter tolerancePlus or minus 3% in the statute. DMV rules say a meter reading of 32% or more is conclusive.

Connecticut tint laws require the front side windows to pass at least 35% of light, counting the glass and the film together. The rear side windows and the rear window need at least 35% too.

This page is not legal advice, and we are not lawyers. Our notes come from Conn. Gen. Stat. 14-99g and the CT DMV tint regulations (RCSA 14-99g), both read on 18 November 2026 and linked again below. Nobody paid for this page, and it carries no affiliate links.

Connecticut tint laws in one line: front side windows 35%, rear side windows 35%, rear window 35%. 16 of the other 51 places on our list allow darker front windows.

What Stands Out in Connecticut

The statute says 35% plus or minus 3%. DMV regulations add that a meter reading of 32% or higher is conclusive proof the window passes. DMV rules say a reading under 20% is deemed to impair driving safety. Tint shops must post a sign at each service counter explaining the law. That rule dates to October 1, 1993.

Connecticut is one of 23 places on our list that use one number for the front side, rear side and rear windows.

How Connecticut Tint Laws Compare

We put all 52 places on one list: 50 states, DC and Puerto Rico. 16 of them allow darker front side windows than Connecticut, and 16 are stricter. 19 more use the same 35% front number, including Hawaii, Idaho, Illinois, Kansas and Kentucky.

PlaceFront sideRear sideRear window
Connecticut35%35%35%
New York70%70% on passenger carsAny darkness
Massachusetts35%35%35%
Rhode Island70%70%70%

A car tinted right at the Connecticut front limit also meets the front number in Massachusetts. It would read too dark for the front rule in New York and Rhode Island.

Film Math for Connecticut Tint Laws

A tint meter reads the glass and the film together. The two numbers multiply. So to pass 35% on glass that passes 70% on its own, the film must pass at least 50%. On 78% glass you need 44.9%, and on 85% glass you need 41.2%.

Film names are not exact. XPEL's own sheet says its XR PLUS 35 passes 38% and its XR PLUS 20 passes 18%. On 78% glass, the darkest XR PLUS film that still reads 35% or more is the XR PLUS 45, at about 35.1%. The next darker one, the XR PLUS 35, reads about 29.6% and would fail.

Check privacy glass before adding film behind the driver. Rear privacy glass on many trucks and SUVs passes 18 to 22 percent before any film. A 35% film on 20% glass reads about 7%, far under Connecticut's 35% rear side number.

Run your own numbers in our VLT stack calculator, and see the tint percentage guide for how film names differ from meter readings.

Medical Exemptions and Penalties in Connecticut

Medical exemptions. Written application to the DMV commissioner with a note from a Connecticut physician or optometrist.

Penalties. The sources we read did not state a fine. Check the CT DMV tint regulations (RCSA 14-99g) before you tint.

Fixing a failed reading. The film has to come off or be replaced with a lighter one. Our removal guide covers doing it yourself, and the removal cost page lists what shops charge.

Official Connecticut Sources

We checked that each link below opened on 18 November 2026.

Connecticut Tint Laws FAQ

The front side windows must pass at least 35% of light with the glass and film together. Rear side windows need 35% and the rear window needs 35%. Always check the CT DMV tint regulations (RCSA 14-99g) for the current rule.

Can you tint the windshield in Connecticut?

Material is allowed only along the top, with its bottom edge at least 29 inches above the driver seat. Clear UV film rules vary, so read the statute linked on this page before adding anything below the top strip.

Is there a medical exemption for tint in Connecticut?

Written application to the DMV commissioner with a note from a Connecticut physician or optometrist. Keep any exemption paper in the car and confirm the current form with the state before you tint.

Does Connecticut limit reflective or mirror tint?

Front side windows: 27% or less (plus or minus 3%). DMV rules cap rear side and rear windows at 24%. A mirror look also makes tint easier to spot at a traffic stop, so a nonreflective film is the safer choice in Connecticut.

Check Before You Tint

For most drivers, Connecticut tint laws mean one thing: keep the front side windows at 35% or lighter with the glass counted. Choose film from the maker's measured numbers and get a meter reading at the shop.

Rules change, so check the statute and the state agency page linked above before you buy film.